Performance | Test method |
Specific ergonomic features | BDS EN ISO 20344, item 5.1 |
Upper/outsole bond strength | BDS EN ISO 20344, item 5.2 |
Determining the dimensions of the safety or protective toe-cap |
|
Determination of internal length | BDS EN ISO 20344, item 5.3.2.1 BDS EN ISO 22568-1, item 5.2.1 (metallic toe-caps) BDS EN ISO 22568-2, item 5.2.1 (non-metallic toe-caps) |
Determining the width of the flange | BDS EN ISO 20344, item 5.3.2.2 BDS EN ISO 22568-1, item 5.2.2 (metallic toe-caps) BDS EN ISO 22568-2, item 5.2.2 (non-metallic toe-caps) |
Impact resistance | BDS EN ISO 20344, item 5.4 BDS EN ISO 22568-1, item 5.3 BDS EN ISO 22568-2, item 5.3 |
Resistance to pressing | BDS EN ISO 20344, item 5.5 BDS EN ISO 22568-1, item 5.4 BDS EN ISO 22568-2, item 5.4 |
Corrosion resistance | BDS EN ISO 20344, item 5.6.2.1 BDS EN ISO 22568-1, item 5.5 |
Impact resistance after exposure to the surrounding environment (thermal and chemical) | BDS EN ISO 20344, item 5.6.2 BDS EN ISO 22568-2, item 5.5.2, 5.5.3, item 5.5.4 |
Impermeability | BDS EN ISO 20344, item 5.7 |
Sizes of puncture-resistant inserts | BDS EN ISO 20344, item 5.8 |
Puncture resistance of puncture-resistant metal inserts | BDS EN ISO 20344, item 5.9 BDS EN ISO 22568-3, item 5.1 |
Puncture resistance of non-metallic puncture-resistant inserts | BDS EN ISO 20344, item 5.10 BDS EN ISO 22568-4, item 5.1 |
Corrosion resistance | BDS EN ISO 20344 item 5.6.2.1 BDS EN ISO 22568-3, item 5.3 |
Resistance to aging and environmental impact | BDS EN ISO 22568-4, item 5.3.2, item 5.3.3, item 5.3.4, item 5.3.5 |
Bend resistance of puncture-resistant inserts | BDS EN ISO 20344, item 5.12 BDS EN ISO 22568-3, item 5.2 BDS EN ISO 22568-4, item 5.2 |
Electrical resistance | BDS EN ISO 20344, item 5.13 |
Slip resistance | BDS EN ISO 20344, item 5.14 |
Heat insulation | BDS EN ISO 20344, item 5.15 |
Cold insulation | BDS EN ISO 20344, item 5.16 |
Energy absorption in the heel area | BDS EN ISO 20344, item 5.17 |
Water permeability of shoes under dynamic conditions | BDS EN ISO 20344, item 5.19 |
Sizing for ankle protection | BDS EN ISO 20344, item 5.21 |
Ability to absorb impact from ankle protection materials included in the upper | BDS EN ISO 20344, item 5.22 |
Dimensions of the protective area for shear resistance | BDS EN ISO 20344, item 5.23.2 |
Shear resistance | BDS EN ISO 20344, item 5.23.3 |
Bond strength between layers in multi-layer soles | BDS EN ISO 20344, item 5.2 |
Abrasion resistance of anti-abrasion toe-cap | BDS EN ISO 20344, item 5.24.2 |
Seam strength | BDS EN ISO 20344, item 5.25 |
Upper thickness | BDS EN ISO 20344, item 6.1 |
Upper height | BDS EN ISO 20344, item 6.2.2 |
Determination of the surface of vapor-impermeable materials | BDS EN ISO 20344, item 6.2.3 |
Minimum height of the surface for which the requirements for the upper are met | BDS EN ISO 20345, item 5.4.1 BDS EN ISO 20347, item 5.4.1 |
Resistant to tearing of the upper, lining and/or tongue | BDS EN ISO 20344, item 6.3 |
Tensile strength of the upper face material | BDS EN ISO 20344, item 6.4 |
Vapor permeability (face material and lining) | BDS EN ISO 20344, item 6.6 |
Water vapor absorption | BDS EN ISO 20344, item 6.7 |
Vapor permeability coefficient | BDS EN ISO 20344, item 6.8 |
Chromium (VI) content | BDS EN ISO 20344, item 6.11 |
Abrasion resistance (of lining and insole) | BDS EN ISO 20344, item 6.12 |
Stiffness of the shoe | BDS EN ISO 20344, item 8.5 |
Resistance to the impact of liquids on the foot | BDS ISO 1817, item 8.3 BDS EN ISO 20344, item 8.8 |
Resistance of the sole to contact with hot surfaces | BDS EN ISO 20344, item 8.9 |
Flame resistance flame resistance time residual glow time | BDS EN 15090, item 7.3 BDS EN ISO 15025 |